manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 24 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 24

24

3.4.6 I-Test Display Settings

There are a number of user display settings that can be configured such as date style, backlight 

control, and sounder control.

3.4.7 

I-Test Configuration Upload/Download Options

I-Test configurations can be created within I-Test Manager and either saved directly to a connected 

I-Test, saved to a local database for upload at a later time or saved to a USB Flash Stick that can 

then be inserted to an I-Test to upload the configuration.

3.5 Starting the software

When I-Test is initially powered it will perform a purge cycle for approximately 30 seconds, during this 

time I-Test Manager cannot be used to connect to I-Test and the message below will be displayed.

Figure 13: System busy message

Double click on the I-Test Manager icon   on your PC’s desktop. The Home screen will be 

displayed (see below).

Figure 14: Home screen

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments