manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 103 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 103

103

4.4.3.2 Bump Test Fail Calibration

This option should be selected if there is a requirement to calibrate a sensor, should it fail a smart bump test.

It should be noted that if a monitor passed a smart bump test but calibration on a sensor has 

expired, at the end of the smart bump test this sensor will be calibrated.

 i

If Calibration and Smart Bump are selected together I-Test will not perform a standalone 

calibration upon insertion of the gas monitor (as described above) but will perform a 

bump test fail calibration on any sensor that fails a smart bump test.

Only sensors that fail smart bump will be calibrated, this will occur even if the sensor was not due a calibration.

Bump Test Fail Calibration can be selected with Smart Bump, Allow configuration and download gas 

monitor log files. Bump Test Fail calibration can 

not

 be selected with speedy bump.

 i

If a monitor passed a smart bump test but calibration on a sensor has expired at the end 

of the smart bump test, this sensor will be calibrated.

 

X

To select a Bump Test Fail Calibration, from the Test Sequence screen use the arrow keys to 

navigate to the Calibration icon 

 then press 

OK

 to highlight the Calibration icon 

À

.  Then 

use the arrow keys to navigate to the Smart Bump icon 

 then press 

OK

 to highlight the 

Smart Bump icon 

Á

. 

 

X

A box will now appear around the icons indicating that Bump Test Fail Calibration function has 

been selected and this test will be performed if a gas monitor is inserted into the I-Test.

 i

To ensure a Bump Test Fail calibration is undertaken smart bump and calibration must 

both be selected.

 

X

Press 

 to return to Test Settings screen and then press 

 again to return to main menu screen.

Note: Smart bump functionality is only applicable to Gas-Pro, a T4 I-Test test screen will not display 

the smart bump icon 

.

Figure 84: Bump Test Fail Calibration screen

13 May 2013 11:30:45

I-Test

À

Á

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments