7
Safety Information
• Read and understand all instructions in the operation section of this manual prior to use.
• Before use ensure that the equipment is in good condition, the enclosure is intact has not been
damaged in any way.
• If there is any damage to the equipment or it is not working properly, do not use, contact your
local Crowcon office or agent for repair/replacement.
• Observe all warnings and instructions marked on the unit and within this manual.
• Observe site health and safety procedures for gases being monitored and evacuation procedures.
• Understand the gas monitor’s screen display and alarm warnings prior to use (see the relevant
user & operator manual).
• Ensure maintenance, service and calibration is carried out in accordance with the procedures in
the manual and only by trained personnel.
•
Any gas monitor that is hazardous area certified must be operated and maintained in strict
accordance with its instructions, warnings and label information included in the relevant user &
maintenance manual.
Unpacking
Remove the I-Test from the packaging. The standard accessories are under the supporting trays.
The following items will be included as standard:
Box contents
• I-Test
• Power Supply
• Pipe Fittings x 2
• Inlet Tubing 1m
• Exhaust Tube 3m
• USB Flash Memory Stick
• CD containing:
User & Operator Manual
I-Test Manager PC Application
• Packing check List
• Declaration of Conformity
Optional items in the box
•
Demand flow regulators
Contents
Exit
Unpacking
Set-up
Operating I-Test
I-Test
Manager
Configuring
I-Test
Warranty
Overview
Contacts
Appendices
Troubleshooting
Specification
