manualshive.com logo in svg

Crowcon I-Test, User'S Operation Manual, Page: 93 / 125

Share
Download
Crowcon I-Test User'S Operation Manual Download Page 93

93

4.2 Accessing the I-Test Main menu

To access the I-Test main menu, the PIN code has to be entered as follows:

 

X

When the I-Test is turned on, the Home screen 

À

 will be displayed.

 

X

Press 

OK

 to enter the PIN code entry screen 

Á

.

Figure 74: PIN entry

 

X

Use the 

 and 

 keys to increment or decrement the first digit of the PIN code until the 

correct number is displayed.

 

X

Press the 

 key to move to the next digit and repeat the above procedure until the next 

number is correctly displayed.

 

X

Carry on until all 6 numbers are displayed correctly and press 

OK

. The Main menu 

Â

 will be 

displayed.

 i

Note: The default PIN code as manufactured is 000000, this can be changed if required 

please refer to 

Section 3.7.3.5 

on

 page 39

.

 i

If the I-Test is left idle, after a preset time (see 

page 31

) the Home screen will be 

displayed.

À

Á

Â

OK

I-Test

I-Test

I-Test

13 May 2013 11:30:45

13 May 2013 11:30:45

13 May 2013 11:30:54

Contents

Exit

Unpacking

Set-up

Operating I-Test

I-Test 

Manager

Configuring 

I-Test

Warranty

Overview

Contacts

Appendices

Troubleshooting

Specification

Summary of Contents for I-Test






























































































































Reviews:

No comments