Addressable Gas Detection System Manual
Addressable System Manual
17
Issue 2, January 2015
2.3.3)
Detector identification
Every detector connected to the control panel is identified by a code which allows its
configuration and contains all the principle data required to physically identify it.
For example:
Fig. 2.6.3) Detector number indication
2.4)
Programming by PC
The Hydra
256
control panel is fully programmable by a personal computer with a
dedicated configuration software (to be ordered separately). The software has been
designed to make the control panel programming simpler and faster.
The control panel can be connected to a Personal Computer using the RS232C
serial port available on the back panel.
The correct serial connecting cable is necessary to connect the control panel to the
computer. (The connector pin layout is shown below)
Fig. 2.7) PC Connection cable
CHN 02001
Indirizzo modulo IN/8 o rilevatore gas
(Module IN/8 or detector address)
da 0 a 255 (from 0 to 255)
Posizione rilevatore da 01 a 08 se modulo
IN/8 oppure 00 se rilevatore collegato su bus
(detector position from 01 to 08 if IN/8
module or 00 is detector on the bus
1
Numero bus (1-4)
(bus number (1-4))
