Addressable Gas Detection System Manual
Addressable System Manual
33
Issue 2, January 2015
TEST / EXIT TEST
This will put to TEST mode or take out of the TEST mode the selected zone. It is
possible to put in TEST mode just parts of the system at user level “Maintenance” or
“Engineer”.
If more than half of the system selected, a warning screen as below will pop-up. A
screen message came out trying to put in Test/Maintenance mode the only zone
defined.
Until the number of zones to put in Test/Maintenance mode does not exceed the
defined limits, the selected items will change the status into TEST.
3.8.2)
Modules
In the zones screen, moving up and down with the arrow keys through the zones list
and pressing ENTER one gets into the modules screen
Fig. 3.8 2) Module screen and options available pressing 3-Module
Press 3-Module for the
SET / UNSET
and
TEST / EXIT TEST
operation, see 3.8.1
and 3.8.2 chapters.
3.8.3)
Relays
In the modules screen, moving up and down with the arrow keys through the
modules list, choosing RIO OUTP and pressing ENTER one gets into the Relays
screens.
Fig. 3.8 3) Outputs screen and options available pressing 3-Relay
