Addressable Gas Detection System Manual
Addressable System Manual
56
Issue 2, January 2015
Sensors
Gas Detectors installed in the system and
directly connected on the CPU loop
(RS485 bus)
are set in
“Sensors”.
Refer to chapter
2-Installation
for further
information.
Click
Sensors
to open the window shown in Fig. 4.5.4 c.
Fig. 4.5.4 c) Detectors configuration screen
Zone
Zone where the Detector is installed
Loop
Loop Number (RS485 bus) where the module is physically connected.
1 or 2 (3 and 4 optional)
Description
Detector description
Address
Detector address. From 1 to 256 (See chapter
2 – Installation
, for
details)
Other Info
Additional description
Modify Sensor
to edit Detector settings.
Delete Sensor
to delete the Detector
