Addressable Gas Detection System Manual
Addressable System Manual
52
Issue 2, January 2015
4.5)
Modification or creation of a new configuration file
Via the
“Open”
command in the
“File”
menu existing configuration files will be
indicated and may be chosen and opened. If some parameters at the HYDRA256
shall be modified, this has to be carried out as described in the following chapters.
Attention Be careful to load the latest version of the configuration file.
If you are not sure then upload the actual file from the control panel, by the
“Upload
Configuration from CPU”
of the
“Communication”
menu.
Otherwise, create a new configuration file via the
“New”
command in the
“File”
menu.
4.5.1)
System information
Fig. 4.5.1 a) System Information screen
On the left column details are indicated
— according the system e.g. the serial number
— according Sensitron and the responsible distributor
The right column may be completed with contact details of persons responsible for
operation of the system at the end user as useful information for service people.
For carrying out any kind of service, e.g. calibration, the service people will be
supplied with the configuration file of the last servicing and will compare this file with
the actual version uploaded from the HYDRA
256
.
