Addressable Gas Detection System Manual
Addressable System Manual
55
Issue 2, January 2015
Fig. 4.5.4 a) Module Overview screen
RIO Input Modules
STG/IN8 analog input modules installed in the system are set in
RIO Input Modules.
Click
Add RIO Input Module
to open the window shown in Fig. 4.5.4 b.
Fig. 4.5.4 b) Module configuration screen
Zone
Zone where the module is installed
Loop
Loop Number (RS485 bus) where the module is physically connected.
1 or 2 (3 and 4 optional)
Description
Module description
Address
Module address. From 1 to 256 (See chapter 2 – Installation, for further
information).
Other Info
Additional description
Modify RIO Input Module
to edit module settings.
Delete RIO Input Module
to delete the module
