Addressable Gas Detection System Manual
Addressable System Manual
71
Issue 2, January 2015
Outputs Redundancy
Fig. 4.5.6 e) Redundancy tab in the outputs definition screen
The relay 4 of module 3 has been defined. After finishing the configuration of the
relay the TAB “Redundancy” is chosen. Because actually no redundant relay is
specified, the information within the TAB is empty (bottom left of Fig. 4.5.6 e above).
After pressing the button “Add Redundant Relay” the right screen occurs.
Fig. 4.5.6 e) List for choosing the redundant output
