Addressable Gas Detection System Manual
Addressable System Manual
57
Issue 2, January 2015
RIO Output Module
STG/OUT16 output modules installed in the system are set in
RIO Output Module.
Click
Add RIO Output Module
to open the window shown in Fig. 4.5.4 b.
Fig. 4.5.4 c) Module configuration screen
Zone
Zone where the module is installed
Loop
Loop Number (RS485 bus) where the module is physically connected.
1 or 2 (3 and 4 optional)
Description
Module description
Address
Module address. From 1 to 256 (See chapter
2 – Installation
, for
further information).
Other Info
Additional description
Modify RIO Output Module
to edit module settings.
Delete RIO Output Module
to delete the module
4.5.5)
Input Modules
Use the “Input Modules” menu to enable and program single gas Detector settings in
the system.
Channel Map
Fig. 4.5.5 a) Channels map screen
