Addressable Gas Detection System Manual
Addressable System Manual
27
Issue 2, January 2015
RESET
Pressing 2 RESET with the cursor on the active event previously acknowledged (the
one marked with "X"), this will get reset and the event will disappear from the active
events list. As described above, there are two situations:
1. the user is already logged in for a previous operation that requires login.
In this case pressing 2 RESET the screen image will simply refresh and delete
the event line from the list
2. the user is not yet logged in.
In this case the LOGIN dialogue window pops up and the user should key in the
password. After which the screen will be refreshed and the event deleted.
NOTE: A user with “Operator” level is NOT allowed to reset active events. He can
only acknowledge them so that the display image may be switched back to the main
screen. The reset may only be done by “Maintenance” or “Engineer” level users.
Pressing 4 PRINT, if a Printer is connected to the system (and if the Printer Mode is
not “Real Time”, see chapter 3.5.5) the event details will be printed out.
3.5.2)
EVENT LOG
In the main window, at any user level, one of the options on the bottom side menus
is EVENTS LOG. Using the up/down arrow keys and then selecting the “EVENTS
LOG” option followed by ENTER, it is possible to enter a sub-menu.
The window that opens will show the most recent events, in chronological order.
Fig. 3.5.2 a) Event detail screen
- Using the up/down arrow keys one may scroll through the list.
- Using the keys 2 and 4, one may refine the search
- Pressing the ESCAPE key instead will switch back to the main window.
Should 3 minutes pass without any key pressed, the view switches to the Operator
main window.
