Addressable Gas Detection System Manual
Addressable System Manual
21
Issue 2, January 2015
At any access level, by selecting in the main window the 1—Menu and than ACTIVE
EVENTS sub menu, it is possible to see the gas detectors in alarm state, or not yet
reset.
FAULT
The fault condition will be activated in the following situations:
1. Short circuit or open circuit in a detecting circuit
2. Removal of a remote gas detector or IN and OUT modules
3. Under-scale detection
4. Over scale detection
Fig. 3.2.1.d) Typical FAULT state of the ACTIVE EVENTS screen.
Pressing Enter key, with a fault event selected, a window is opening showing the
details of the related channel as in the next image:
Fig. 3.2.1.e) FAULT details screen.
