Addressable Gas Detection System Manual
Addressable System Manual
72
Issue 2, January 2015
There will be chosen the not defined output 2 from module 3. After touching “Accept”
the following warning (see Fig. 4.5.6 f below) will be indicated.
Fig. 4.5.6 f) Typical warning when choosing as redundant a non defined output
If the chosen redundant channel is already specified and differs from the first one
(also channel 6 from module 3), a slightly different warning (Fig. 3-18.4) will be
indicated. In this case it can be chosen which of the two events shall be taken over
for both relays.
Fig. 4.5.6 g) Typical warning when choosing as redundant an already defined output
