Crow serenity Technician'S Handbook Download Page 63

Page: 63 / 73

Address Description

Default

computers. The parameter contains 3 decimal digit.

10.4: Communications/TCP-IP

Address Description

Default

P255E

Ethernet Enabled

If this option is on, the Ethernet connection is

Enabled.

Enable

P256E

DHCP Enabled

Dynamic Host Configuration Protocol (DHCP) is a

network protocol that enables a server to automatically assign an

IP address to a control panel from a defined range of numbers
configured for a given network. If this option is on, the DHCP is

Enabled.

Note: If P256 is enabled, you won't be able to access P257-P260

Enable

P257E

Static IP -

In the absence of DHCP, control panel may be

manually configured with an IP address (P257), subnet mask

(P258), gateway (P259), DNS server (P260). up to 16 characters

Disable

P258E

Subnet Mask -

The network subnet mask for defined static IP

address.

up to 16 characters

Disable

P259E

Gateway -

The network gateway address for defined static IP

address. up to 16 characters

Disable

P260E

DNS Server -

The network DNS server address for defined static

IP address. up to 16 characters

Disable

P377E

TCP Remote Control Port -

The TCP/IP port number used for

remote control applications

3064

P378E

TCP Receiver Port -

The TCP/IP port number used by report

channel for connection to TCP receiver.

4700

10.5: Communications/Can - Bus

Address Description

Default

P261E

CAN-bus Enabled

–

If this option is on, the CAN serial bus

protocol is enabled to connect individual systems such as an

extender zone/output cards or external keypads.

Disable

10.6: Communications/Contact ID Codes

Address Description

Default

P262E

Zone Alarm Contact ID Code - -

Set Contact ID code for zone

alarm. Code value has to be from 1000 to 1999. when input is

zero, system uses default code

1130

P263E

Zone Near Alarm Contact ID Code

Set Contact ID code for

zone near alarm. Code value has to be from 1000 to 1999. when
input is zero, system uses default code

1138

P264E

Zone Verified Alarm Contact ID Code -

Set Contact ID code for

zone verified alarm. Code value has to be from 1000 to 1999.
when input is zero, system uses default code

1139

Summary of Contents for serenity










































































Search results

Summary of Contents for serenity

Reviews:

Brands by name

Popular brands

Crow serenity, Technician'S Handbook

Search results

Summary of Contents for serenity

Reviews:

Brands by name

Popular brands