SERENITY – technician Guide
24
Address Description
Default
PSTN, channel 6 - TCP/IP, channel 7 - voice message GSM and
channel 8 - ContactID GSM.
P196E
CID GSM -
Set channel type as ContactID GSM. Need to set
GSM CID enabled to use this type of channel. Default
assignment: channels 1,2 - ContactID PSTN, channels 3,4,5 -
voice message PSTN, channel 6 - TCP/IP, channel 7 - voice
message GSM and channel 8 - ContactID GSM.
CID GSM
works if GPRS
is disable
P197E
SIA PSTN -
Set channel type as SIA PSTN. Need to set PSTN
enabled to use this type of channel. Default assignment:
channels 1,2 - ContactID PSTN, channels 3,4,5 - voice message
PSTN, channel 6 - TCP/IP, channel 7 - voice message GSM and
channel 8 - ContactID GSM.
(see
Description)
P198E
SMS -
Set channel type as SMS. Need to set GSM IP enabled or
GSM CID enabled to use this type of channel. Default
assignment: channels 1,2 - ContactID PSTN, channels 3,4,5 -
voice message PSTN, channel 6 - TCP/IP, channel 7 - voice
message GSM and channel 8 - ContactID GSM.
SMS works if
CID GSM is
enable
P199E
Voice Message PSTN -
Set channel type as Voice Message
PSTN. Need to set PSTN enabled to use this type of channel.
Default assignment: channels 1,2 - ContactID PSTN, channels
3,4,5 - voice message PSTN, channel 6 - TCP/IP, channel 7 -
voice message GSM and channel 8 - ContactID GSM.
(see
Description)
P200E
Voice Message GSM -
Set channel type as Voice Message GSM.
Need to set GSM IP enabled or GSM CID enabled to use this type
of channel. Default assignment: channels 1,2 - ContactID PSTN,
channels 3,4,5 - voice message PSTN, channel 6 - TCP/IP,
channel 7 - voice message GSM and channel 8 - ContactID GSM.
(see
Description)
Step 4: Report Channels Phone
Address Description
Default
P202E
Phone Number or Server Address –
Can be up to 8 phone
numbers (for channels defines as PSTN/GSM/Voice/SMS) or 8
server addresses (for channel defined as TCP-IP/GPRS). The
length is up to 50 characters long (digits only for phone numbers
and characters/digits for server address).
Note: once phone number is inserted, the channel is set as an
active channel automatically.
Disable
Step 5: Backup Channel
Address Description
Default
P203E
Channel Backup -
This channel will be selected if main channel
has failed to open connection or deliver a message.
Note:
1.
A channel can directly have only one backup channel. You
can indirectly set more than one backup channel by
creating a chain of backup channels (For example, Active
channel 1 has channel 2 set as backup, channel 2 has
channel 3 as backup and so on)
2.
You can set a channel as backup to two or more active
Ch 2 BA ch.1
Ch 4 BA ch.3
