17
4.
Use the scroll buttons
to select the required function
5.
Press on the Enter button
6.
Select the required language and press the Enter button
2.
Quick Programming
–
This programming mode is used for a rapid and focused programming of the panel.
Further on is a list of the functions available in this programming mode.
For more details on the parameters below, refer to installation summary table section in
this manual, you can easily find the command description by using the Command number
which appears in command number column in this page.
Note: if this level is used for the first system configuration, it is recommended to use the
installer mode after that.
Parameter
1. Installer code.
2. System date and time.
3. Report channels type-> Choose
CID PSTN or CID GSM or SIA PSTN or SMS or
Voice message PSTN, Voice message GSM.
4. Report channels phone number
Or server IP addresses 1-4.
5. Backup channels 1-4.
6. Area 1 acc numbers CH 1-4.
7. Area 2 acc numbers CH 1-4.
