SERENITY – technician Guide
62
Address Description
Default
P239E
Hold line open following Voice report for DTMF control –
If
this option is on , the dialer will keep the telephone line open
after been answered to the voice message alarm PSTN call so
that the person at the phone can then use their DTMF codes to
enter an operational commands (see commands from P298 to
P305).
Enable
P241E
Time to First Dialer Test Call -
Define the time of first
automatic test connection. The following test connection time is
defined by option
[P242]
Disable
P242E
Test Call Time Period -
Time period between successive
automatic test connections
Disable
P243E
Control Phone Numbers –
Setting of up to 8 assigned phone
numbers which are authorized for control the system remotely
via DTMF control.
Disable
P244E
Control Phone Is Modem -
Option defines using the phone line
in modem's data mode (as alternative to regular voice mode)
Disable
10.2: Communications/PSTN
Address Description
Default
P245E
PSTN Enabled
–
If this option is on, the PSTN modems are
enabled.
Disable
P247E
Auto-Answer Ring Count
-
If the PSTN is used for remote
control, the number of rings before panel answers the call can be
set at this parameter. Minimal value is 2 for using caller ID
detection (see also P248E).
8
P248E
Answering System Defeat –
The panel can automatically answer
an in-coming call in two ways. The first is set auto-answer ring
count to a convenient number (P247E) and let the phone ring until
this number is reached at which time the panel will answer the call.
The second method is to use Answering System Defeat which
entails calling to the panel and letting to ring no less than two
times, hanging up, and then ringing back within 45 seconds. The
panel will now answer the call on the second ring.
Disable
10.3: Communications/GSM
Address Description
Default
P249E
GSM IP Enabled
–
if this option is on , the GSM IP is Enabled
Disable
P250E
GSM CID Enabled
-
If this option is on, the GSM CID is Enabled.
Disable
P251E
PIN Code –
GSM pin code number according GSM network
requirements, up to 8 digits length.
Disable
P252E
GSM User -
GSM user according GSM network requirements.
Disable
P253E
GSM Password -
GSM Password according GSM network
requirements.
Disable
P254E
GSM APN -
GSM access point name according to your cellular
provider.
Up to 32 characters
Disable
P380E
Unstructured supplementary service data-
Unstructured
Supplementary Service Data (USSD) is a protocol used by GSM
cellular telephones to communicate with the service provider's
Disable
