© 2020 All rights reserved. Data subject to change without notice.
29
Rev. B | 2020.07
cGas Detector Analog Transmitter - Operation Manual
Press ENTER. Press the UP button until you see Selected Channel.
Selected Channel
>CO
Press ENTER. Using the UP or DOWN buttons, scroll through the item you want
to apply changes to:
•
Gas Type (CO2)
•
Temperature (if installed)
•
Humidity (if installed)
Press ENTER.Presse the UP button until you see Hide Channel.
Hide Channel
>Unhidden
If you want to change its present condition, press ENTER. Use the UP button to
choose Hidden (or Unhidden) and press ENTER to save and Exit.
Repeat for each channel you want to hide or unhide.
7.5 Alarm Status, Fault Detection and Communication Failure Alerts
If a channel is in alarm, the following letters will be displayed at the end of the
line for that channel.
•
low
for low alarm
•
mid
for mid alarm
•
high
for High alarm
CO2
800 low
CO2
1000 mid
CO2
1200 high
The cGas Detector has built in fault detection, and in the event of a problem
with the measurement circuitry the transmitter will indicate a fault condition
on the display. Normal operation will resume once the fault condition has been
corrected.