© 2020 All rights reserved. Data subject to change without notice.
21
Rev. B | 2020.07
cGas Detector Analog Transmitter - Operation Manual
NUMBER
FEATURE
Door Hinge
Conduit Entry Points 12.7 mm / 1/2 in diameter
Mounting Holes 4.47 mm / 0.175 in diameter
maximum head diameter 8 mm / 0.32 in, #8 or 4 mm
screw
6.5.2 Enclosure Bottom
NUMBER
FEATURE
Door Hinge
Conduit Entry Points 12.7 mm / 1/2 in diameter
6.6 Wiring Connections
The cGas Detector analog transmitter is a low voltage powered device. Any
application of operating voltages higher than indicated in the specification
may result in damage. Double check wiring connections prior to powering
the transmitter. Damage from incorrect wiring connections or from too much
voltage applied is not covered under warranty.
All wiring should be run in EMT (or better) conduit properly earth grounded.