4. If needed, specify additional AD servers and ports by clicking the green '+' button and entering a valid host
DN value.
Clicking the red - button removes the extra AD server and port, if required. A maximum of six AD servers and
ports may be specified.
Figure 60. CSM Active Directory Additional Servers and Ports Screen
5. In the Base DN field, enter the base distinguished name (DN) value.
6. To require the Lustre cluster to use authentication to bind to the AD server, perform the following:
a. Check the Storage cluster must use authentication to bind to this AD server box.
b. In the Bind DN field, enter a valid bind DN value.
c. In the Password field, enter a valid password. The password corresponds to the Authentication DN.
d. In the Password Retype field, re-enter the password.
7. Click Save.
13.7.2 Specify Lustre User Authentication via the LDAP Screen
Prerequisites
●
LDAP has been selected as the Lustre user authentication method for the ClusterStor L300 and L300N
system.
●
If the LDAP server is being specified using the hostname, the DNS must first be configured (as part of
Configure the Lustre Network Interfaces
).
Procedure
1. Select LDAP on the left side of the screen.
Perform the First-Run Configuration
80
