[admin@n002]$
sudo crm_mon -1r
If an error occurs, log into the primary MGMT node and undo the wizard changes:
[MGMT0]$
cscli cluster_mode --mode pre-shipment
6. Click Next to launch the tests, and proceed to
Run Lustre Validation Tests -- Lustre Not Mounted
on page
73.
13.4.1 Run Lustre Validation Tests -- Lustre Not Mounted
Prerequisites
Lustre was either never mounted on the system or it has been unmounted.
About this task
This procedure runs both Lustre basic tests and IOZone performance tests on a ClusterStor L300 and L300N
system. When the tests complete, the results display on the progress screen and are available for download.
Figure 56. CSSM Lustre Validation Tests Progress Screen
Procedure
1. Click Next at the bottom of the screen to launch the tests.
The Validation Test In Progress Screen opens while the validation tests are being performed.
2. Wait approximately 15 minutes per SSU cluster for the validation tests to complete.
The more SSUs (or SSU+1) in the system, the more time the tests take. When the tests are complete, the
"Progress" screen appears showing the configuration and test procedures to be complete.
Perform the First-Run Configuration
73
