It is possible to use LDAP, NIS, and Local at the same time.
5. Click Apply.
6. Click OK on the confirm window, and again on the Lustre Users in Progress window.
The Lustre Users in Progress window opens; applying the settings takes a minute or two.
13.7.1 Specify Lustre User Authentication via the Active Directory Screen
Prerequisites
●
Active Directory (AD) has been selected as the Lustre user authentication method.
●
If the AD server is being specified using the hostname, the DNS must first be configured (as part of Lustre
Network Interface configuration).
Procedure
1. Under Lustre Users on the left side of the screen, select Active Directory.
Figure 59. CSM Active Directory Screen
2. In the AD Server field, enter the AD server's hostname or IP address (if not already displayed).
The AD server can be specified either as a hostname or as an IP address. ClusterStor L300 and L300N
systems use service discovery (DNS-SD) to query the DNS server and discover the AD server's hostname/IP
address. If the system cannot identify the AD server, an empty field displays and this value must be entered
manually.
IMPORTANT: If the AD server is being specified using the hostname, the DNS must first be
configured.
3. In the Port field, enter the
port_number
value.
The default value of the port is 389. However, AD can be configured to run on a non-standard port, if SSL
encryption is not used. Enter either the specific port number or the default of 389.
Perform the First-Run Configuration
79
