2. Install the disks in the same location they were in at the factory by referencing the drive numbers, orientation
(front/back, upper/lower), or SSD designation provided by manufacturing on the shipping container.
From the front of the container, drive 0 is in the lower-left slot drive 41 in the upper-right slot. Drive 42 is in
the lower-slot, drive 83 in the upper-right slot.
Figure 6. Disk Drive Shipping Container
Choose to use either the speedloader multiple-disk method or the individual-disk method to install the disk
drives.
3. Use a T-20 Torx screwdriver to unlock the two drawer latches on the front of each drawer in the lowest empty
5U84 enclosure. Pull open the lower drawer.
4. For Any Disk Installation Situation: Install the disk drives in the lowest empty 5U84 (SSU) enclosure
drawer.
Always begin from the lowest empty drawer, and populate the drives from the rear drive slots to the front drive
slots (numerically from highest to lowest), then working upward to the next empty drawer.
NOTE: The two drive carriers with SSD drives install in slots 28 and 70.
Install Disk Drives in a 5U84 Enclosure
20
