Covidien Newport HT70, Operator'S Manual

Page: 34 / 148

Setup and Pre-Use Preparations
3-4 Operator's Manual

Note:
Check the battery charge gauge on the touch screen to ensure that both the Power Pac battery and the
secondary backup battery are fully charged before disconnecting from external power.
The Power Pac can also be connected to external power independently of the ventilator. Before
installation on a Newport HT70 Ventilator, check the battery charge LED on the bottom edge of
the battery to ensure that the green LED is lit, indicating that the charge level is approximately
90% or above. Attach the Power Pac to the ventilator and turn the ventilator on to verify the actual
charge level percentage (shown in the message display area).
3.4
Using the Power Switch
The momentary-type power switch is located on the left side rear of the ventilator along the
bottom edge.
Figure 3-3. Power Switch
3.4.1
Turning on the Power
1.
To turn on the ventilator, press the power switch once and wait for the startup screen to appear, as
shown in
Figure 3-4.