Covidien Newport HT70, Operator'S Manual

Page: 55 / 148

Alarms Screen Navigation
Operator's Manual 4-7
4.4.3
Start Ventilation Button
Touch the Start Ventilation button to exit the standby condition and begin ventilation.

WARNING:
Ensure that all settings are appropriate for the patient prior to starting ventilation. Note that
during standby condition, the monitored O
2
is not representative of the set O
2
or the O
2
that will
be delivered during ventilation. After starting ventilation, use a calibrated oxygen monitor (such
as the one that is built-in to the ventilator) to verify that the air oxygen entrainment mixer setting
or liter flow attached to the low flow oxygen reservoir is delivering the prescribed O
2
.

Note:
Be sure to review all chapters of this manual before you use the Newport HT70 Ventilator for the first time.
4.5
Alarms Screen Navigation
The Alarms screen can be accessed in all domains and in standby or ventilating condition except
where noted.
Reference Control Data Selection on page 9-3 and Alarms on page 9-5 for ranges and more details
for each alarm and setting.
Enter the Alarms Screen
Touch the Alarms button.
Set Alarm Limits (Not Available in Basic Domain)
Touch an Alarm limit button to activate (highlight) it, and then use the up and down arrow panel
buttons to adjust the limit. Press Accept to confirm changes or press Cancel to return to original
settings. Multiple limits can be set before pressing Accept .