Covidien Nellcor Operator'S Manual Download Page 21

Page: 21 / 120

Product Views

Operator’s Manual

2.4

Product Views

2.4.1

Front Panel and Display Components

Front and Side Panels

Figure 2-1.

Front and Side Panel Components

Alarm Audio Paused
button

Press to toggle between disabling and re-enabling the
audible alarm. Reference

Menu Options Navigation

, p.

4-28.

Return button

Press to exit a menu displayed on the screen and go to
the main screen. Reference

Menu Options Navigation

p. 4-28.

Power On/Off button

Press and hold to turn on or off the monitoring

system

using AC power or Lithium-ion batteries. Ref-

erence

Menu Options Navigation

, p. 4-28.

USB port (USB A type)

Use USB interface for firmware upgrades.

USB port (mini USB B type)

Use mini-USB interface for trend data downloads.

Jog dial

Use to navigate and control of display and monitoring

system functions.

LCD display panel

Use to monitor all graphic and numeric patient infor-
mation as well as status conditions and warning mes-
sages.

SpO

connector

Use to connect to the interface cable and SpO

sensor.

Summary of Contents for Nellcor

























































































































Search results

Summary of Contents for Nellcor

Reviews:

Related manuals for Nellcor

Brands by name

Popular brands

Covidien Nellcor, Operator'S Manual

Search results

Summary of Contents for Nellcor

Reviews:

Related manuals for Nellcor

Brands by name

Popular brands