Operation
28
Operator’s Manual
4.4
Menu Options Navigation
Navigating menu options on the monitoring system requires manual manipu-
lation of the three buttons and the jog dial.
Press the desired
interface button
.
1.
Power On/Off button —
Press and hold this blue button to power on or to
power off the monitoring system. This button illuminates at power on and
remains lit until power off.
2.
Return button —
Press this green button for less than two (2) seconds to exit
menu items and return to the main monitoring screen. This button illuminates at
power on and remains lit until power off.
3.
Alarm Audio Paused button —
Press this orange button for less than two (2)
seconds to disable or re-enable audible alarms. This button illuminates at power
on and remains lit until power off.
Rotate or press the
jog dial
to navigate among various portions of the screen
and to select menu items.
Note:
If a user presses and holds the RETURN button while accessing a menu item, but before
saving any changes, the monitoring system requires the user to confirm a cancellation
of all pending changes. A user prompt appears and the user must either save all pending
changes (save new value) or cancel all pending changes (return to previous value) before
taking any other action.
Figure 4-2.
Save Change Screen
Summary of Contents for Nellcor
