Covidien Nellcor Operator'S Manual Download Page 90

Page: 90 / 120

Accessories

Operator’s Manual

9.4

Biocompatibility Testing

Biocompatibility testing has been conducted on Nellcor™ pulse oximetry
sensors in compliance with ISO 10993-1, Biological Evaluation of Medical
Devices, Part

1: Evaluation and Testing. The pulse oximetry sensors have

passed the recommended biocompatibility testing and are therefore in compli-
ance with ISO

10993-1.

GCX Wall Mount Arm and
Channel

—Attaches to the adapter

plate, which attaches to the arm.

GCX Roll Stand

—Attaches to the

adapter plate.

Covidien Technical Services: Patient Monitoring

15 Hampshire Street, Mansfield, MA 02048 USA

1.800.635.5267, 1.925.463.4635

or contact a local Covidien representative

www.covidien.com

Summary of Contents for Nellcor

























































































































Search results

Summary of Contents for Nellcor

Reviews:

Related manuals for Nellcor

Brands by name

Popular brands

Covidien Nellcor, Operator'S Manual

Search results

Summary of Contents for Nellcor

Reviews:

Related manuals for Nellcor

Brands by name

Popular brands