Product Overview
12
Operator’s Manual
Display
Figure 2-2.
Display Components
1
Upper and lower alarm limits
Reflects upper and lower SpO
2
and pulse rate alarm limits.
An alarm sounds each time patient saturation or pulse rate
values violate these alarm limits.
2
SpO
2
real-time value
Indicates hemoglobin oxygen saturation levels. Current
upper and lower alarm limit settings appear as smaller
values to the left of the dynamic SpO
2
value.
3
Time
Indicates the current time in hours, minutes, and seconds.
4
Pulse amplitude (blip bar)
Indicates pulse beat and the relative (non-normalized) pulse
amplitude. As the detected pulse becomes stronger, more
bars light with each pulse.
5
SatSeconds™ icon
The SatSeconds™ feature provides alarm management for
mild or brief SpO
2
limit violations. When the SatSeconds™
feature is enabled, the SatSeconds icon fills in the clockwise
direction as the SatSeconds alarm management system
detects SpO
2
readings outside of the limits setting. The Sat-
Seconds icon empties in the counterclockwise direction
when SpO
2
readings are within limits. When the SatSec-
onds icon reaches full, a medium priority alarm sounds. The
adult default setting is 100. Reference
6
Alarm active icon
Appears, along with an alarm message, when patient
values violate an alarm limit threshold. Audible and visual
alarms occur. Reference
for additional alarm icons.
Summary of Contents for Nellcor
