Cosmed Q-NRG, User Manual, Page: 51 / 152

49/148 REF C04717-02-91 Q-NRG User Manual, Edition 4.2
Chapter 3 - Q-NRG Operation COSMED srl
Calibration
Q-NRG has been designed for resting metabolic rate measurement without the need of time-consuming warm-
up and daily calibrations; To achieve this, Q-NRG adopts more complex technological solutions compared to
conventional metabolic systems, e.g. most calibration procedures are automatically and seamlessly performed
in the background by the device prior to or during measurements and all parameters are adjusted to the testing
environmental conditions.
The device requires monthly gas analyzers calibration. This section describes all calibration procedures. Operators
and Experts are recommended to read only paragraphs applicable to their role (see table below).
Device Warm-Up
To ensure accurate measurements, refer to the following warm-up times.
Function Warm-up time from power on (minutes, at 20°C)
Test (all modes) 5
Pneumotach Calibration (VENTILATOR Mode) 5
Gas Analyzers Calibration (Cylinder) 20
Blower (CANOPY Mode) None
Turbine (MASK Mode) None
Required Calibration Procedures
Calibration Recommended interval Performed by
Pneumotach (VENTILATOR Mode)
Before each REE test, mandatory Operator
Gas Analyzers (Cylinder)
Monthly Expert
Blower/ Internal Flowmeter (CANOPY Mode)
Monthly Expert
Turbine/External Flowmeter (MASK Mode) Monthly Expert