manualshive.com logo in svg

Cosmed Q-NRG, User Manual, Page: 35 / 152

Share
Download
Cosmed Q-NRG User Manual Download Page 35

33/148

REF C04717-02-91 Q-NRG User Manual, Edition 4.2

Chapter 2 - Installation 

COSMED srl

is approximately 120 minutes).

LED

Color

Indication when illuminated

Blue

Q-NRG device is connected to external power and the battery is charging

Green

Q-NRG device is connected to external power and the battery is completely charged

Power ON and OFF

Q-NRG can operate either when powered by external AC power or by the internal battery, which is recharged 
whenever the device is connected to power.

To Power ON the Device

1.  Press and hold the Power button (ON/OFF) for 2 seconds to power cycle the device.
2.  Removing AC power does not power off the device. The device remains powered by the internal battery.

To Power OFF the Device

• 

Press and hold the Power button (ON/OFF) for 2 seconds and follow the on-screen prompts to ensure the 
device is shut off.

Summary of Contents for Q-NRG

























































































































































Reviews:

No comments