9
Specify WAN IP Address:
Enter the IP address provided by your ISP.
Subnet Mask:
Enter the subnet mask values provided by your ISP.
Default Gateway IP Address:
Your ISP will provide you with the Default Gateway IP Address.
Domain Name Server (DNS):
Your ISP will provide you with at least one DNS IP Address. Multiple DNS IP settings are common. The first available DNS entry is used in
most cases.
Note!
You have to set a public IP address for each of your LAN PCs if you select this connection type
3-8 Modem using LLC encaps
Figure 13. Modem using LLC Encaps
Choose this setting according to the following conditions:
1. You want this device acting as an ADSL modem.
2. Your ISP used LLC encapsulation.
Your ISP may use DHCP to provide an IP address or to provide you with one or more IP addresses, as well as asking you to use PPPoA or PPPoE connection modes when
you apply for the service. However, as you have chosen to make this device act as an modem, you have to know how to configure your PCs.
When you have properly configured the Setup page, click “
Apply
”. You can now test to see if the settings are all correct by successfully connecting to the Internet.
4.0 Advanced Configuration
Most users will not need to change any advanced configuration on this router. This section is intended for users who are familiar with both wireless and routers.
4-1 Firewall
This allows users to configure the Stateful Packet Inspection Firewall to protect the user from external hackers.
From the One Page Setup screen select Firewall Settings from the left hand side.
Figure 14. Firewall
•
Advanced Firewall Protection
:
Enable/Disable:
This enables/disables the firewall, and gives protection from ‘Denial of Service’ attackes whilst also enabling
the Stateful Packet Inspection Firewalll.
•
Web Filter:
Enabling or Disabling the following allows users to perform filtering on various incoming packet types.
Press “
Apply
” after making any changes.
ENGLISH
