CEAG Notlichtsysteme GmbH
6
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
Important Notes
1.5 Copyright Protection
All information from the contents, text, drawings, pictures and further representations are protected with regards
to copyright.
1.6 Spare Parts
Only use original spare parts from the manufacturer
ATTENTION!
Wrong or faulty spare parts can cause damage, failure or collapse of the system.
When using unapproved spare parts, all guarantee, service, damage and liability claims are forfeited.
1.7 Recycling
Packing materials are not refuse, they are valuable materials and should be re-used or recycled.
CEAG has been awarded the Recycling Certificate of INTERSEROH GmbH. The contract number
is 85405. It guarantees that the packaging materials which it covers are properly recycled and that
all the requirements of the German Packaging Code are complied with.
INTERSEROH collection points are required to dispose of CEAG packaging free of charge.
Electronic components contain materials that can damage health and the environment if not properly disposed of.
Dispose of electronic components in accordance with national guidelines and regulations.
2. Safety
The automatic test system is designed and built in conformity with the latest technical rules at the time of its deve-
lopment and production, so it is safe to operate. Danger maybe presented by the device, if it will be used for other
than the intended purpose and by unskilled personnel.
WARNING!
When planning a lighting system with a AT-S
+
system you first establish wether the proposed electrical
installations satisfy local environmental conditions.
Special environmental conditions (e. g. areas subject to explosion hazards or areas with an aggressive
atmosphere) call for special equipments and installations.
Only operate the system and parts connected to it when they are in a technically perfect condition, and comply
with
r
the safety and hazard information given in these assembly and operating instructions,
r
the work and safety instructions issued by the operator of the system,
r
the installation and operating data given in „3 Technical data“ and in the CEAG Catalogue.
Faults that can affect the operation or safety of the system must be reported immediately to the company officers
and remediated.
2.1 Inteded Use
The automatic test systems AT-S
+
systems are exclusively designed to monitor and control a lighting system with
general and emergency lighting.
Their operation is program controlled. They must be programmed and set up by engineers with specialist know-
ledge of the legal and technical requirements governing the assembly and operation of lighting systems.
The operating safety can only be guaranteed by intended use of the systems.
ATTENTION!
Every use beyond or different than the intended purpose is prohibited, and therefore not in accordance with
regulations!
Summary of Contents for Ceag AT-S+ C0
Page 76: ...400 71 860 177 XXX 07 12 WK...
