CEAG Notlichtsysteme GmbH
46
Operating
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
LEDs (1) in the top row indicate running functions that were initiated with the
Function buttons (2) aside.
The 3 left-hand buttons initiate present functions of the controller software for
the
CU
S
+
control module:
– <Test> activates a simulated mains failure for testing the emergency
lighting equipments while the button is pressed. A short button press
simulates a 5 second mains failure.
– <FT> activates the menu option F-Test start / cancel
The controller software performs a function test whose progress and results
are output on the display (5). An F-Test tests the final circuits and the
luminaires connected to them. You will find further information about this in the
description of the related program function in the following section.
– <DT> without function
Further details about the system´s operating status and faults can be requested
in the Test- & Status menu.
The control module can be programmed to assign functions to the 3 right-hand function buttons F1 ... F3; e. g. the first
button F 1 can be assigned the function manual reset.
The other LEDs (3) indicate:
– Ready for operation
– Feed from the power source for safety services (emergency operation),
– Failures that can be further analysed using the control module´s menu options.
The control keys on the keypad (6) are used to initiate the program functions on the controller software or change
their parameter settings.
8.4 Operating the CU S
+
control module
1
4
3
6
7
2
5
Summary of Contents for Ceag AT-S+ C0
Page 76: ...400 71 860 177 XXX 07 12 WK...
