CEAG Notlichtsysteme GmbH
67
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
10. Maintenance / Checking
10.1 Safety Notes
WARNING! Risk of Injury!
Improper maintenance work can cause serious personal injury and / or material damage. This work has to
be performed only by authorised, skilled and adequate personnel who have received instructions providing
information on the device and in observance of local safety regulations.
Before working on and with the system switch it off and protect it against reset.
Do not touch the system unti its temperature is as high as the ambient temperature.
10.2 General information to maintenance / checking
The carrying out of the safety inspections as required by statutes and directives has to be made regularly. The
operator of the emergency lighting system is responsible for organising and supervising this work!
The following information must be specified in writing and made available at all times :
The nature and extent of the work
Recording of work results
Responsibilities and permits for carrying out the work
- which persons may carry out which operations?
- which persons are responsible for supervising the work?
Duties of reporting (e. g. in the case of faults or function tests)
Organisational measures when working on the Automatic Test System. This may include:
- Duties of information and reporting on the start, duration and end of the work
- Safety measures while the work is being carried out: e. g. standby lighting, power supply isolation and
lock-out (e. g. removing the fuses, key-operated switch, safety signage)
- Safety equipment for the personnel carrying out the work on the plant (e. g. suitable work clothing and
personal protection equipment)
- Safety equipment providing protection from hazards caused by adjacent plant (e. g. safety grilles, barri -
ers, making safe or roads)
Maintenance and repair work at the Automatic Test System can be done by the customer service of CEAG
Notlichtsysteme GmbH at any time. (s. enclosed Customer Service Order).
Our customer service locations can be found all over Germany, see the enclosed map „Addresses: CEAG Customer
Service“.
In addition, we offer you a
Maintenance Contract for Emergency Lighting
making organisation easier to you!
This contract contains the annual checking and includes the following work:
- Testing of mains/emergency light switching function of devices
- Visual check of electrical equipment
- Mechanical check at the devices
- Operational test of other electronics
- Checking of lamps only for luminaires with CG-monitoring
Not included in maintenance services is repair and overhaul work, in particular the replacement of defective
electronics or defective light sources.
In case of returns you need a RMA number from us.
For further information see www.ceag.de!
Maintenance / Checking
Summary of Contents for Ceag AT-S+ C0
Page 76: ...400 71 860 177 XXX 07 12 WK...
