CEAG Notlichtsysteme GmbH
47
Operating
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
The Main Menu of the controller software is opened from the main screen with the key (7), refered to in the the
current test as <menu>. This key is also used to return to the previous menu level until the main screen appears
on the graphic display (5).
The <ok> key is used to confirm a selection. Pressing the menu key exits the corresponding menu item and the
changes are not stored in the controller´s nonvolatile memory; the controller software usually returns to the next
higher menu.
The <ESC> key is used to cancel changes entered in a menu; the controller software returns to the next higher
menu without saving the changes.
Selections within a menu of the controller software are made with the cursor keys
on the keypad.
– The arrow keys
are used to select a menu line (up/down) or to move between input boxes.
– The arrow keys
are used to select settings or to increment or decrement parameters by a certain change
value. These selection options are displayed on the graphic display (5) with their icon.
An action is initiated by jogging a key several times; continuous pressing of a key (for more than approx. 1 second)
speeds up the jog function.
The next double page shows an overview of the basic menu structure and further information about operating the
system and setting parameters.
Starting point:
Main screen
<Menu>
Selecting the main menu:
/
: Select Basic settings in the main
menu
1
)
2
)
<Menu> key: back to main screen (cancel)
<ok>
key: confirm selection, show selec-
ted menu (with the Function test
selection)
3
)
1
) visible area of the main menu
(with screen roll (scroll-)function)
2
) currently non-visible area
3
) highlighting of a selection
Graphic display (main screen
during normal operation)
Menu selection
Lanuage
Date & time
Function test
Delay on mains return
Test & status menu
Block,reset
Basic settings
DLS/TLS setup
Circuit setup
Luminaire setup
Memory card
Summary of Contents for Ceag AT-S+ C0
Page 76: ...400 71 860 177 XXX 07 12 WK...
