Section 3: System Operation
996-0207
43
Table 6 ASCI response
Returns
Description
00
Normal return
01
Surelite not in serial mode
02
Coolant flow interrupted
03
Coolant temperature over temp
04
(not used)
05
Laser head problem
06
External interlock
07
End of charge not detected before lamp
fire
08
Simmer not detected
09
Flow switch stuck on.
The response to
SC
(Shot count) is a 9 digit ASCII code terminated by a Carriage Return. An
example is shown in Table 7 below.
Table 7 SC response
Returns
Description
000123456
shot count = 123,456
To disable RS232
1. With system running, transmit the ASCII code ST 0.
2. Press
START/STOP
button to off.
3. Press
SELECT
button to
Son
.
4. Press
ARROW DOWN
button to
SoF
.
5. Resume normal operation.
Direct Access Triggering (DAT)
Stanford Research Pulse Generator Setup
N
ECESSARY
E
QUIPMENT
•
1 ea. Delay Generator model #DG535
•
2 ea. Standard BNC cables
•
1 ea. 9 pin “ D” connector, male
S
TEPS
1.
Make up a special cable consisting of 2 BNC cables and a 9 pin D male.
•
Label one of the BNC cables FIRE and the other Q-SWITCH.
•
Take the FIRE and Q-SWITCH BNC cables and remove the connetor from one end
and expose the center conductor and shield.
•
Solder center conductor of the FIRE BNC to pin 7 of the 9 pin D connector.
•
Solder the shield of the FIRE BNC to pin 2 of the 9 pin D connector.
Summary of Contents for Surelite EX 10
