61
5. Carefully pull the ceramic plate out of one vertical section, slightly tilt
the plate forward, then withdraw it from the other vertical section.
6. Remove the ceramic angle(s) located on top of the next ceramic ele-
ment.
Repeat steps 2 to 6 until all ceramic plates of a row are removed.
Installation of the ceramic plates
Before installation, check all ceramic plates and ceramic angles for pos-
sible damage. Damaged ceramic plates and ceramic angles
must not be
reinstalled
.
For installation of the ceramic plates proceed in the reverse order of re-
moval (also see section “Installation of the post-evaporation elements” of
chapter 4.2).
Important!
Make sure to reinstall the ceramic plates in the appropriate
locations (according to the
overview section of the installation drawing
)
and to install all plate sealings correctly.
5
6
