48
5.4
Inquiring operating parameters
The Condair Dual provides a so-called
display level
used for
inquiring
various operating parameters
. However, the display level does not let
you change the parameters.
Accessing the display level
The Condair Dual is in
standard operation mode
(the display of the control
unit shows the current state of operation).
• Press the
<
E
>
or
<
M
>
key to access the display level.
The opposite confirmation appears briefly on the display.
Then, the first parameter of the display level shows up.
Selection of parameters in the display level
• Use the
<
▼
>
and
<
▲
>
keys to select the desired parameter:
<
▼
>
: next parameter
<
▲
>
: previous parameter
Note: The display level is an endless loop, i.e. stepping forward from the
last parameter automatically brings up the first parameter again.
Quitting the display level
Proceed as follows to escape from the display level:
• Press the
<
M
>
or
<
E
>
key.
The control unit returns to the status display.
Note: If no key is pressed in the display level for 10 minutes, the control
unit automatically returns to the status display.
perform. [kg/h]
appliance: 100
Condair Dual
ready
perform. [kg/h]
appliance: 100
software version
V6.00
perform. [kg/h]
act.value: 33
perform. [kg/h]
appliance: 100
Condair Dual
ready
display level
