51
–
Booster pump on/off status while flushing
This parameter indicates whether or not the booster pump runs during
the flushing cycle of the permeate conduit.
Note: This parameter is available only if the control unit is configured to
work with an internal booster pump.
–
Silver ionization on/off
This parameter indicates whether the silver ionization (disinfection) is
activated (
on
) or deactivated (
off
).
–
Current of silver ionization
Actual current of silver ionization in mA.
Note: This parameter is available only if the silver ionization is ac-
tive.
–
Remaining capacity of silver electrode
Remaining capacity of silver electrode in Ah.
Note: This parameter is available only if the silver ionization is ac-
tive.
–
Working hour meter
Working hours elapsed since firsttime commissioning of the Condair
Dual.
–
Remaining time until maintenance is due
Hours remaining until next maintenance is to be carried out.
Note: The time displayed refers to 100% humidification output. If cur
-
rent operation requires less output, the maintenance intervals may be
extended accordingly.
Regardless of the remaining time display, a complete maintenance has
to be carried out once a year (see chapter 6).
–
Internal controller
Internal controller activated (
on
) or deactivated (
off
).
Note: The internal controller may be activated from within the display
level (see chapter 5.5).
–
Nominal value of relative humidity
Preset nominal value of relative humidity in % rh.
Note: This parameter is available only if the internal controller is
active.
–
Proportional range of the internal controller
Preset proportional range (P-range) of the internal controller in %.
Note: This parameter is available only if the internal controller is
active.
nom. value rh
45 %
controller funct
off
maintenance due
5831 h
elapsed time
180 h
Ag degermin.
on
act.val Ag curr.
2.4 mA
rem.cap.Ag elec.
7 Ah
p-pump w.fl.
off
P-band
10 %
