22
Mount the base plate (only systems equipped with a “Booster”):
6. For systems with twopart vertical sections first connect all sections
with the connector pieces “
A
” (2 pcs. per connection) and the M6x12
hexagon socket screws (9 pcs. per connection).
5. If your system is equipped with a “Booster”, now mount the base plate
in the tub. The base plate is attached to the tub ledge
using self-tap-
ping screws (drill holes ø3.3 mm before)
, behind the post evaporation
unit.
Important!
If your system has no service door behind the post-evapora-
tion unit, now place the booster elements in the duct, just behind the base
plate.
Connect two-part vertical sections:
5
ø3.3 mm
6
M6x12
A
A
