To replace Device 1A, reverse Step 10.
To replace Enclosure A, reverse Steps 1 through 8.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
CAUTION
On COMPAQ PORTABLE 286 Personal Computers, three bottom mounting screws are
used to secure Enclosure A.
These screws are shorter than those used in
Enclosure B.
To avoid damaging the drives, return the correct screws to the
correct locations when replacing the drive assemblies.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Chapter 7.12 Monitor Enclosure Removal and Replacement
The redesign of the COMPAQ Portable Computer chassis required a redesign of
the monitor enclosure (Figure 7.12-1).
This new design of the monitor enclosure (PN 105034-001 no longer
available) is used in COMPAQ Portable Computers with the serial number
1524020B0001 and above, and all COMPAQ PORTABLE 286 Personal Computers.
DO NOT use the previous monitor enclosure (PN 100481-001 no longer
available) in the computers mentioned above.
NOTE: To prevent possible mistakes in replacing the monitor enclosure, a
tab has been placed on the chassis near the fan/bracket assembly to
allow ONLY monitor enclosures with this new design to be installed.
Using
the
previous
monitor
enclosure
may
result
in
power
supply
failure.
