releases the power supply assembly from the chassis.
7.
Carefully lift the power supply assembly out of the chassis and gently
remove all remaining connectors from the board (Figure 7.8-9).
To replace the power supply assembly, reverse Steps 1 through 7.
NOTE:
Be sure to securely tighten the mounting screw with the 5/16 inch box
end wrench because using only the socket extension wrench may not securely
tighten the mounting screw (thereby causing grounding problems).
COMPAQ Portable Fan/Bracket Assembly Removal and Replacement
To remove the fan/bracket assembly:
1.
Complete the High Voltage Access Plate Removal Procedure
(see Section 7.5).
2.
Disconnect the fan power connector from the power supply (Figure 7.8-10).
