1716 - 51
Failed file I/O test
The following steps apply to error
in read test
codes 1700 - xx through 1716 - 59:
1716 - 52
Failed file I/O test in
1.
Check the fixed disk drive
compare test
controller board for the
proper switch setting
1716 - 53
Failed drive/head register
(see Chapter 8). *
test
2.
Replace the fixed disk drive
signal and power cables.
1716 - 54
Failed digital input
3.
Replace the fixed disk drive
register test
controller board. *
4.
Replace the fixed disk drive
1716 - 55
Cylinder 1 failed
assembly.
5.
Replace the system board.
1716 - 56
Controller RAM failed
* 286 based COMPAQ Personal
1716 - 57
Controller to drive test
Computers only
failed
1716 - 58
Failed to write sector
buffer
1716 - 59
Failed to read sector
buffer
1716 - 60
Non COMPAQ fixed disk
drive controller ROM
------------------------------------------------------------------------------
Error
Error
Required
Code
Description
Action
------------------------------------------------------------------------------
Tape Drive
19yy - xx
------------------------------------------------------------------------------
1901 - xx * Tape servo write
The following steps apply to all
19yy - xx error codes:
1902 - xx * Tape format
1.
Replace the tape cartridge.
1903 - xx * Tape drive sensor test
2.
Replace the signal cable.
3.
Replace the diskette/tape
1904 - xx * Tape BOT/EOT test
controller board.
4.
Replace the tape drive
1905 - xx * Tape read test
assembly.
1906 - xx * Tape write/read/compare
* 286 based COMPAQ Personal
test
Computers only
1906 - 01
Drive not installed
1906 - 02
Cartridge not installed
1906 - 03
Tape motion error
1906 - 04
Drive busy error
1906 - 05
Track seek error
1906 - 06
Tape write protected error
