The mass storage devices have different configurations depending on the
computer model.
Determine the configuration of the mass storage devices.
COMPAQ Portable and COMPAQ PLUS Personal Computers
o Enclosure A contains:
diskette drive ONLY.
o Enclosure B contains:
diskette drive or fixed disk drive.
COMPAQ PORTABLE 286 Personal Computers
o Enclosure A contains:
diskette drive and blank panel or diskette drive and
tape drive or two diskette drives
o Enclosure B contains:
fixed disk drive ONLY.
Mass Storage Device Enclosure B Removal and Replacement
To remove Enclosure B:
1.
Complete the removal procedures for all installed controller and expansion
boards (see Section 7.9).
2.
Remove the mass storage device access plate (see Section 7.6).
3.
Disconnect the power cable(s) from the mass storage device.
4.
Disconnect the fixed disk drive power connector from its J113 socket on
the COMPAQ PORTABLE 286 system board (Figure 7.11-2).
