7.
Cut all tie wraps that secure the switch cable to the chassis.
To replace the security lock switch assembly, reverse Steps 1 through 7.
Chapter 7.15 Battery Removal and Replacement
NOTE:
This procedure is to be performed by Authorized COMPAQ Dealers ONLY.
To remove the battery:
1.
Complete the system board removal procedure (see Section 7.10 and
Figure 7.15-1).
2.
Cut the tie wrap that holds the battery in place.
3.
Carefully lift the battery from its velcro mounting and out of the chassis
(Figure 7.15-2).
