Comet U0110G, User Manual

Page: 7 / 73

IE-LGR-UxxxxM-23
7
Guide to installation and usage of the device
Inserting the SIM card into the device
Prepare suitable SIM card - depending on the intended use, prepare
a suitable SIM card that will meet the expected amount of sent SMS
messages and transmitted data. The transmitted data can be sent through
data connection. Approximate data consumption is 1.5kB for each sent data
message when sending via HTTP (if you use HTTPS, it increases to 8.5kB
per message).
Use the micro SIM card and insert it into the device. If you have a nano SIM
card, you must purchase a micro SIM adapter. If the SIM card is protected
by PIN code, make a note it, and later insert this code into the device
configuration. Select such a tariff that meets your requirements concerning
the quantity and safety of the message delivery.
For some tariffs the
message delivery may be stopped when a certain number of messages or
amount of transferred data is exceeded or when a given time period has
elapsed.
If you use the optional IoT SIM card accessory (order code LP105), you get
the option of a mobile connection to send data to the COMET Cloud. With
this card it is possible to transfer 500 MB of data, i.e. the endurance of this
SIM card is
approximately 5 years at a 10-minute sending interval (possibly
2.5 years at a 5-minute sending interval). Attention, this IoT SIM card does
not support sending of SMS messages!
Make sure the device is turned off or turn it off.
Screw off the rear cover of the device
– caution, the device is constantly
supplied from the internal battery. Proceed with care. Prevent external
conductive parts from contacting electronics components when manipulating
the device without the back cover installed.
•
Insert the card into the SIM card holder