8
IE-LGR-UxxxxM-23
•
Removing the card from the SIM card holder
•
Screw up the rear cover of the device
-
at first check the seal in the nut
for integrity, then screw down the lid
with the aid of four self-cutting screws.
ATTENTION
– tighten screws gradually
and with feeling!
The radio module status
(blue LED indication)
For
UxxxxM
models:
LED state
Module status
.
Off
The module is not running
64ms On / 800ms Off
The module is not synchronized with network
64ms On / 2000ms Off
The module is synchronized with network
64ms On / 600ms Off
The data transmission after dialling the PPP
connection
For
UxxxxG
models:
- using a 2G network (GSM modem):
LED state
Module status
ON
Searching Network
200ms On / 200ms Off
Data Transmit
800ms On / 800ms Off
Registered network
Off
Power off
- using a 4G network (LTE modem):
LED state
Module status
ON
Searching Network
200ms On / 200ms Off
Data Transmit / Registered
Off
Power off
Installing the datalogger, placing the probes
•
Choose a suitable location for installing the device
- bear in mind that
the environmental conditions should be concordant with the
. Do not situate the device near sources of electromagnetic
interference.
Summary of Contents for U0110G
