Comet U0110G, User Manual

Page: 36 / 73

36
IE-LGR-UxxxxM-23
Set the interval for sending Keep-alive text messages. Such messages
can be sent by the device to all selected recipients on regular interval
basis. They include the datalogger identification, the current
measurement values of all channels as well as the conditions of all
alarms.
These messages can contain user-readable data
or alternatively machine-readable data. For more detail see Annex 6 :
SMS message format
. The shortest interval that can be set is 5
minutes; the longest interval is 1 week. With intervals that are longer
than 1 day a daily message sending time can be set.
Determine which recipients the informative Keep-alive text messages
with user-readable data should be sent to. An easy readability by
a mobile phone is an advantage of this kind of messages.
The disadvantage is that larger reports can be divided into several
messages. These messages will not be sent out if no recipient has
been chosen.
Determine which recipients the informative Keep-alive text messages
with machine-readable data should be sent to. These messages are
suitable for machine processing in customer
’s systems. All data is
every time compressed into a single message. This data is not suitable
to be read on a mobile phone. These messages will not be sent out if
no recipient has been chosen.
Modem
– Data - General
___________________________
In this panel, you configure the APN settings needed for data
communication with your mobile operator (sending data messages).
Contact your SIM card supplier for this information.
If you are using your own data collection system, the “JSON version”
option allows you to set the older data message format to be backward
compatible with the older data collection system with new devices. This
option is to maintain the backward compatibility of newer devices
with the older collection system, without having to update it.
Modem
– Data – Data sending
______________________
This panel sets where and how often messages will be sent. You can
send the data:
•
Periodically in preset interval. The interval is selectable from 5
minutes to once per week and you can set different interval when
battery powered and when it have external power available.
•
Asynchronously (immediately) when preset alarm occur.
For battery mode you can select „Buffered mode“ option which collects
data into internal buffer and then sends them together in preset interval.
It sends more data at once and saves battery life. On the other hand,
the data is received with higher delay.